Mašin-Elektro

Description

Pipe cold cutting and beveling machine with self-centring device

FAST

RANGEØE 153 – 1545 MM (6”-60”)

Result of an accurate and intensive planning, the FAST encapsulates the latest generation top quality mechanical components as well as the constant pursuit of designing and development of innovative machinery of GBC.
This machine is not only suitable for cutting and bevelling of pipe edges. The FAST is the ideal solution for pipeline servicing.
Its structural design enables the operator to split the machine body in two halves in order to ease the positioning phase when it is necessary to relocate the machine on a new pipe section.

However, the most significant peculiarity of this machine is the self-centring device, which by means of a toothed crown enables the operator to obtain a perfect centring during the positioning phase, granting a perfect stability obtained by special high resistance clamping pads.
The FAST, is available in three different motorizations (electric, pneumatic and hydraulic), and in its standard equipment also lists two copier tool holders for the compensation of eventual irregularities caused by ovalization of the pipe.

* Mašin – elektro d.o.o. nastoji da bude što precizniji u opisu svih proizvoda, ali ne možemo da garantujemo da su svi opisi kompletni i bez grešaka.

Karakteristike

		FAST 6-12 Pneumatic	FAST 12-18 Pneumatic	FAST 18-24 Pneumatic	FAST 24-30 Pneumatic	FAST 30-36 Pneumatic	FAST 6-12 Electric	FAST 6-12 Hydraulic	FAST 12-18 Electric	FAST 12-18 Hydraulic	FAST 18-24 Electric	FAST 18-24 Hydraulic	FAST 24-30 Electric	FAST 24-30 Hdraulic	FAST 30-36 Electric	FAST 30-36 Hydraulic
Locking range	mm (ø o/d.)	5,9-12,8	11,6-18,1	17,5-24	23,6-27-3	29,5-36	5,9-12,8	5,9-12,8	11,6-18,1	11,6-18,1	17,5-24	17,5-24	23,6-27,9	23,6-27,9	29,5-36	29,5-36
Pneumatic motor power	Hp (W)	3100	3100	3100	3100	3100	–	–	–	–	–	–	–	–	–
Air Consumption	cfm	99	99	99	99	99	–	–	–	–	–	–	–	–	–	–
Air pressure	psi	87-116	87-116	87-116	87-116	87-116	–	–	–	–	–	–	–	–	–	–
Electric motor power	Watt	–	–	–	–	–	2400	–	2400	–	2400	–	2400	–	2400	–
Voltage	Volt	–	–	–	–	–	220	–	220	–	220	–	220	–	220	–
Frequency (cycles)	Hz	–	–	–	–	–	50/60	–	50/60	–	50/60	–	50/60	–	50/60	–
Hydraulic motor power	W	–	–	–	–		–	3	–	3	–	3	–	3	–	3
Oil flow rate min. required	gpm	–	–	–	–	–	–	1,06	–	1,06	–	1,06	–	1,06	–	1,06
Tool Holders stroke	inch	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36	2,36
Radial feed rate per rev	inch	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004	0,004
Idle Speed	giri/min	21	17	14	12	10	19	23	16	18	12	14	10	11	9	9
Max chuckj Torque	Nm	1216 (8bar)	1534 (8bar)	1889 (8bar)	1262 (8bar)	2614 (8bar)	865	1453	1090	1830	1340	2257	1609	2702	1860	3951
Machine weight	kg	110	130	150	170	190	110	110	130	130	150	150	170	170	190	190

FAST

RANGE: 1” – 36” o.d. FUNCTIONS: pipe cold cutting, bevelling, facing, counterboring. MATERIALS: carbon steel, alloy, stainless steel, duplex. POWER: pneumatic, electric or hydraulic.

Description

Karakteristike

Slični proizvodi

BOILER 1-4 K

RANGE: 23 – 108 mm i/d.

HYPERMAXI 20-40

SUPERBOILER T5

RANGE: 49 – 207 mm i/d

SUPERCUTTER

MINI K

RANGE:
1” – 36” o.d.

FUNCTIONS:
pipe cold cutting, bevelling, facing, counterboring.

MATERIALS:
carbon steel, alloy, stainless steel, duplex.

POWER:
pneumatic, electric or hydraulic.

RANGE:
23 – 108 mm i/d.

RANGE:
49 – 207 mm i/d